Advanced Search
esd
Photo
Accessories TRA
ADAPTER EFT-CDN
Product No: 103641
 Adapter for EFT calibration / verification at single or three phase CDN-EFT outputs. Remark: EFT measurement without power supply connected to CDN. Usable with CDN 25, 32 and 63A per phase.



 
CDN-A-06-32-AC-DC
Product No: 105114
 Automatic Coupling / Decoupling Network for SURGE and EFT Coupling onto 2 STRINGS DC+ and DC- up to 1000V and onto AC 3P/690V and 32A continuous. AC and DC over current protected For use with TRA2006 and TRA3000.



 
CDN-A-3P100-480 F-S
Product No: 104116
 Three phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 100A per phase. Automatic coupling path selection for EFT and SURGE controlled by TRA2000, TRA2004, TRA2006, TRA3000 and MIG0603INx with SN > 199.



 
CDN-A-3P100-690 F-S
Product No: 104118
 Three phase CDN with line voltages L to N/PE=398V and L to L=690V, line current 100A/Phase. Automatic coupling path selection for EFTand SURGE controlled by customized TRA2000, TRA2004, TRA2006, TRA3000, and MIG0603INx with SN > 199. The generator must be ordered with CDN.



 
CDN-A-3P200-480 F-S
Product No: 105076
 Three phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 200A per phase. Automatic coupling path selection for EFT and SURGE controlled by TRA2006, TRA3000 and MIG0603INx with SN > 199. A.c and D.c over current protection.



 
CDN-KIT1000
Product No: 103471
 SURGE coupling-decoupling network for data lines according to IEC 61000-4-5.



 
CDN2000-06-32
Product No: 103475
 Three phase CDN with line voltages L to N/PE=280V and L to L=415V, line current 32A per phase. Manual coupling path selection for EFT, SURGE and RING.



 
CDN2000A-06-32 480V
Product No: 103695
 3 phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 32A per phase. Automatic coupling path selection for EFT, SURGE and RING controlled by TRA2000, TRA2004, TRA2006, TRA3000 and MIG0603INx with SN > 199.



 
CDN2000A-06-32 CMC
Product No: 103696
 Three phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 32A per phase. Auto coupling path selection for EFT, SURGE, RING controlled by TRA2006 and MIG0603INx with S/N >199. Coupling path mode L1 + L2 + L3 + N to PE.



 
CN-BALUN
Product No: 103579
 Balanced / unbalanced transmission line transformer for EFT and 1MHz Damped Sine according to ANSI / IEEE C37.90.



 
CN-R40C05
Product No: 104931
 SURGE coupling network according to IEC 61000-4-5 and EN50121-4. Two each Resistor 40ohm and capacitor 0.5uF. The CN-R40C05 can be used for data lines or low voltage power supply.



 
CN16-22-7C
Product No: 105840
 Coupling network for common mode coupling up to 300V 50/60Hz in accordance with IEC 60255-22-7, 2 ports: 2 x R 220 Ohm and 2 x C= 0.47µF



 
CN16T
Product No: 103539
 T-coupling network for telecom lines coupling dc, 50/60Hz and sinusoidal up to 150kHz according to IEC 61000-4-16.



 
DIPS100E
Product No: 103643
 100 Ohm resistor for switching time calibration. Can be used with TRA1000, TRA2000, TRA3000, PFS32, PFS63, PFS75. 100 Ohm +/-5%, 1 kW.



 
EFT INSULATION
Product No: 103658
 Set of 2 x 10cm Insulation to EFT circuit according to IEC 61000-4-4.



 
MF-COIL-HAND
Product No: 105260
 MF-COIL-HAND extends the TRA3000 C for magnetic field test In accordance with EN55103-2 2009, inhomogeneous field Magnetic field range 0.4 A/m up to 4A/m Frequency range 50Hz to 10kHz



 
MF1000-1
Product No: 103480
 Test coil 1m x 1m for magnetic field test: 50/60Hz according to IEC 61000-4-8, SURGE according to IEC 61000-4-9, Damped oscillatory wave according to IEC 61000-4-10.



 
MF1000-3
Product No: 103482
 Test coil 1m x 1m for magnetic field test according to IEC 61000-4-8 only for short duration 3s 1000A/m.



 
MF3STAND
Product No: 103484
 Stand to MF1000-3, moveable in two directions, max. height 1.8m. Must be ordered together with the MF1000-3. Can only be shipped together with the MF1000-3.



 
PFS100DC
Product No: 104940
 Extends the TRA3000 D for d.c. interruption test D.C. Power fail simuator for Imax 100A d.c., Vmax 600V +/-10% Output floating DC+, DC- and GND, 4 UH, weight approx 50kg Inrush current > 800A, dc overcurrent protected.



 
PFS63
Product No: 103675
 The PFS63 can generate interruptions on three phase power supply up to 480V/ 63A. For DIPS and supply configuration the PFS63 can be inserted in the SRC63 rack.Minimum configuration TRA with DIPS circuit.



 
PFS75-690V
Product No: 105847
 The PFS75 can generate interruptions on three phase power supply up to 690V/ 75A. For DIPS and supply configuration the PFS75 can be inserted in the SRC75 rack. Minimum configuration TRA with DIPS circuit.



 
SRC32-36UH
Product No: 103700
 36 Unit High rack with 3 phase transformer for 3 phase dips. The rack has enough space for inserting TRA2004 or TRA2006 and PFS32 or PFS63. Minimum configuration: Generator with DIPS circuit and PFS32 or PFS63.



 
SRC63
Product No: 103676
 18 Unit High rack with 3 phase transformer for 3 phase dips. The rack has enough space for inserting PFS63 Minimum configuration: Generator with DIPS circuit and PFS63.



 
SRC75-690V
Product No: 105848
 Extension of PFS75-690V. The SRC75-690V together wih the PFS75-690V can generate interruptions and DIPS on 3 phase power supply up to 690V/ 75A.



 
VAR-EXT1000
Product No: 103470
 Extends a TRA including a D circuit with 16A external variac for DIPS and variation, complies fully with IEC 61000-4-11 Ed2.



 
VERI-CP-EFT
Product No: 104668
 Transducer plate for capacitive coupling clamp calibration. Connector HV BNC with 15cm strap to bond to the reference ground plane. Requires VERI50 EFT



 
VERI1K EFT
Product No: 103473
 1kOhm termination with high voltage BNC and integrated divider for EFT calibration / verification.



 
ADAPTER EFT100
Product No: 104968
 Adapter for EFT calibration / verification at 100A three phase CDN CDN outputs: Remark: Consist of two parts; 1 ground strap and 1 adapter. EFT measurement without power supply connected to CDN.



 
CDN-A-3P100-480 F
Product No: 104117
 Three phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 100A per phase. Automatic coupling path selection for EFT controlled by TRA2000, TRA2004, TRA2006 and TRA3000.



 
CDN-A-3P100-690 F
Product No: 104119
 Three phase CDN with line voltages L to N/PE=398V and L to L=690V, line current 100A per phase. Automatic coupling path selection for EFT controlled by customized TRA2000, TRA2004, TRA2006 and TRA3000. The generator must be ordered together with the CDN.



 
CDN-A-3P100-AC-DC
Product No: 105849
 Three phase CDN with line voltages L to N/PE=398V and L to L=690V, d.c 1000V line current 100A/Phase. Automatic coupling path selection for EFTand SURGE controlled by customized TRA2006 and MIG0603INx with SN > 199. The generator must be ordered with CDN.



 
CDN-A-3P200-690 F-S
Product No: 105077
 Three phase CDN with line voltages L to N/PE=398V and L to L=690V, line current 200A/Phase. Automatic coupling path selection for EFTand SURGE controlled by modified TRA2006, TRA3000, and MIG0603INx with SN > 199. Generator modification only at EMCP .



 
CDN16-450C
Product No: 103697
 Single phase coupling decoupling filter for 115V, 400Hz to TRA2000 SURGE and EFT. Maximum current per phase 16A.



 
CDN2000A-06-32
Product No: 103477
 Three phase CDN with line voltages L to N/PE=280V and L to L=415V, line current 32A per phase. Automatic coupling path selection for EFT, SURGE and RING controlled by TRA2000, TRA2004, TRA2006, TRA3000 and MIG0603INx with SN > 199.



 
CDN2000A-06-32 690V
Product No: 103493
 3 phase CDN with line voltages L to N=398V and L to L=690V, synchronisation output line current 32A per phase, auto coupling path selection for EFT and SURGE controlled by TRA2006, TRA3000 F-S or MIG0603INx



 
CDN2000A-06-63
Product No: 103582
 Three phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 63A per phase. Automatic coupling path selection for EFT and SURGE controlled by TRA2000, TRA2004, TRA2006, TRA3000 and MIG0603INx with SN > 199.



 
CN-EFT1000
Product No: 103468
 Capacitive coupling clamp 100 Ohm according to IEC 61000-4-4



 
CN16
Product No: 103538
 Coupling network for common mode coupling dc, 50/60Hz and sinusoidal up to 150kHz according to IEC 61000-4-16.



 
CN16-22-7D
Product No: 105841
 Coupling network for differential mode coupling up to 250V 50/60Hz in accordance with IEC 60255-22-7, 2 ports: 2 x R 100 Ohm and 2 x C= 0.1µF



 
CN2000TT MC
Product No: 103568
 One test pistol and one banana plugged cable with crocodile clip for current injection tests according to IEC 61000-4-5 up to 3kA. The test pistol can be used together with TRA and MIG systems with MC plug outputs on front panel or NW.



 
DN2000-22-5
Product No: 103699
 One Decoupling Module for IEC 60255-22-5 application. Inductance 20mH, varistor at the auxiliary side 275V, Imax continuous 3A, intermittent use 10mn 5A.



 
ESD2000
Product No: 103604
 ESD discharge network 150pF - 330 Ohm. Contact discharge up to 10kV, air discharge up to 16kV according to IEC 61000-4-2 Ed.2. Stand available under ESD3000 System, product type ESD-STAND Ed2. For use with TRA2000, TRA2004 and TRA2006 only.



 
MF-HELMHOLTZ
Product No: 105259
 MF-HELMHOLTZ extends the TRA3000 C for magnetic field test In accordance with EN55103-2 2009, homogeneous field Magnetic field range 0.01A/m up to 10A/m Frequency range 50Hz to 10kHz



 
MF1000-2
Product No: 103481
 Test coil 1m x 2.6m for magnetic field test: 50/60Hz according to IEC 61000-4-8, SURGE according to IEC 61000-4-9, Damped oscillatory wave according to IEC 61000-4-10.



 
MF1STAND
Product No: 103483
 Stand to MF1000-1, moveable in all three directions, max height 1.8m. Must be ordered together with the MF1000-1. Can only be shipped together with the MF1000-1.



 
NW-TRA-RAIL
Product No: 103677
 Discharge network to TRA or MIG with surge circuit for WF 5/50µs generation in accordance with IEC 60571, EN50155, RIA Spec 12 (1984). Maximum voltage approx. 3kV.



 
PFS32
Product No: 103670
 The PFS32 can generate interruptions on three phase power supply up to 480V/ 32A. For DIPS and supply configuration the PFS32 can be inserted in the SRC32 rack.Minimum configuration TRA with DIPS circuit



 
PFS75
Product No: 103701
 The PFS75 can generate interruptions on three phase power supply up to 480V/ 75A. For DIPS and supply configuration the PFS75 can be inserted in the SRC75 rack. Minimum configuration TRA with DIPS circuit.



 
SRC32-18UH
Product No: 103671
 18 Unit High rack with 3 phase transformer for 3 phase dips. The rack has enough space for inserting TRA2000 D, TRA3000 D, and PFS32 or PFS63. Minimum configuration: Generator with DIPS circuit and PFS32 or PFS63.



 
SRC32-AMD1
Product No: 104871
 18 Unit High rack with 3P transformer for 3 phase dips 40,50,70,80%. The rack has enough space for inserting PFS32 or PFS63. Minimum configuration: TRA3000 D with PFS32 or PFS63.



 
SRC75-18UH
Product No: 103702
 Extension of PFS75. The SRC75 together wih the PFS75 can generate interruptions and DIPS on 3 phase power supply up to 480V/ 75A.



 
TRA-Setup
Product No: 103486
 Flexible connection TRANSIENT to EFT reference plate, 1m cable, 2 x 470kOhm with connection plates



 
VERI-C18-S
Product No: 106137
 18µF cap for surge current calibration at sc, IEC 61000-4-5 Ed.3 Application: Calibration of generator without 18µF capacitor on direct output Coupling capacitor between SURGE generator and external CDN



 
VERI-DIPS
Product No: 103474
 Measuring set for calibration / verification of the inrush current TRA1000, TRA200xxx, TRA3000, PFS32 and PFS63.



 
VERI50 EFT
Product No: 103472
 50 Ohm termination with high voltage BNC connectors and integrated divider for EFT calibration / verification.