Advanced Search
insulation
Photo
Hardware Accessories
ADAPTER AU-NZ
Product No: 100313
 EUT Power Supply Adapter Schuko to AU/NZ plug.



 
ADAPTER UNIVERSAL
Product No: 100316
 EUT Power Supply Adapter Schuko / Universal Plug (IT, FR.).



 
AUX-SYNC-ADAPTER
Product No: 103657
 Ext. synchronisation of generators with the AUX-SYNC-ADAPTER for 50/60Hz power supplies e.g. MIG1203CWG.



 
CN-MIG18 AMP
Product No: 103655
 Two test pistols for conducted tests. Cable length 1m with AMP plugs. The test pistols can be used together with MIG systems equipped with AMP plug outputs.



 
CN12-XX-500
Product No: 103393
 Small cover boxe usable with generators MIG1203 or MIG1203CWG. The box includes a 500 Ohm resistor and is equipped with three AMP outputs: Common, Rgenerator and 500 Ohm



 
COVER BOX SMALL AMP
Product No: 105558
 Cover box for customised connection of generators with output on top. Application limited to generators listed in the instruction sheet "COVER BOX SMALL".



 
ICON3000-EMCP
Product No: 106008
 ICON3000-EMCP control and measuring system 19" plug-in 4 UH for use with v,i impulse generators, and high voltage d.c supplies. New frontplate, LOGO EMC PARTNER Technical Specification see UM



 
RS232CB
Product No: 103640
 Serial connection of two generators e.g. MIG and HAR.



 
TC-MIG24
Product No: 103532
 Test cabinet made of acrylic glass, for EUT with max. dimensions 30x20x20cm. Insulation withstand 1.2/50µs up to max. 36kV. With interlock safety switch and warning lamps green/red Usable with all generators with output on top.



 
V-PROBE-PHV
Product No: 105106
 V-Probe PHV 1000, voltage rating 1 kV AC/DC, 4 kV transient , 2 Meter Cable - Ratio: X100 system bandwidth: 400 MHz, usable with MIG-OS-MB



 
ADAPTER CH
Product No: 100258
 EUT Power Supply Adapter Schuko to CH plug.



 
ADAPTER USA
Product No: 100315
 EUT Power Supply Adapter Schuko to US plug.



 
CABLE RJ45 CAT5e 1m
Product No: 106169
 Cable to UTP8, RJ45 CAT5 S/FTP 0,25m black



 
CN-MIG18 SHOE
Product No: 103656
 Two test pistols, cable length 1.5m with cable shoes. The test pistols can be used together with MIG systems with TC-MIG24 for insulation tests. Can not be used for CWG or current generators.



 
COVER BOX LARGE
Product No: 103730
 Cover box for customised connection of generators with output on top. Application limited to generators listed in the instruction sheet "COVER BOX LARGE" .



 
ICON3000
Product No: 104115
 ICON3000 control and peak measuring system 19" plug-in 4 UH for use with Marx impulse generators, current generators and high voltage d.c supplies. With rear plate connector sockets and special interface See technical specification in the UM. Blue EMCP front panel.



 
OPT-LINK-CTRL3000
Product No: 104796
 Ethernet optical connection between PC and Generator equipped with CTRL3000, optical cable length 10m.



 
RS485-RS232 ADAPTER
Product No: 104770
 Serial converter RS485 to RS232 Application: control PS3 from TRA3000



 
TC-MIG24HL
Product No: 103694
 Test cabinet for heavy loads, made of acrylic glass, for EUT with max. dimensions 30x20x20cm. Insulation withstand 1.2/50µs up to max. 36kV. With interlock safety switch and warning lamps green/red. Can be stood next to generator.



 
V-PROBE-SI
Product No: 105107
 Differential V-Probe TT-SI 9010 A, 1:1000, voltage rating ±7000V (DC + peak AC) or 5000Vrms, system bandwidth DC to 70MHz (-3dB), usable for SURGE measurement.



 
ADAPTER GB
Product No: 100314
 EUT Power Supply Adapter Schuko to GB plug.



 
ATS SENSOR
Product No: 104048
 Accessory to CTRL3000: External Atmospheric sensor measures; temperature 0°C up to 70°C, humidity 0% up to 100% and pressure 300hPa up to 1200hPa. Cable length 1.5m.



 
CABLE RJ45 CAT6 0.25m
Product No: 105914
 Cable to UTP8, RJ45 CAT6 S/FTP 0,25m black



 
CN-MIG24
Product No: 103530
 EUT connection box with two test pistols, interlock and warning lamps green/red. Usable with MIG systems with output on top up to Vmax 18kV 1.2/50µs, Imax 8/20µs 1kA. Application limited see instruction sheet "CN-MIG24".



 
COVER BOX SMALL
Product No: 103731
 Cover box for customised connection of generators with output on top. Application limited to generators listed in the instruction sheet "COVER BOX SMALL".



 
ICON3000-ADAPTER-Set
Product No: 105377
 19" 4 UH box includes connectors to adapt the ICON3000 to WSTS Marx impulse generators. Requires modified ICON3000, PN 106011



 
OPTICAL LINK
Product No: 103654
 Serial, optical connection between PC and generator, length 20 m. Incl. 1 Gender Changer f.-f. 25pole.



 
SYNC-ADAPTER
Product No: 103647
 Ext. synchronisation of generators with the SYNC-ADAPTER galvanically decoupled e.g. MIG2000-6 with Fx-DO-160-S17 or MIG0600MS.



 
USB-RS232 ADAPTER
Product No: 103639
 RS232 / USB adapter for remote control of EMCP generators from PC with USB.



 

Test Place Automation - Brochures

icon Test Place Automation