Advanced Search
esd
Photo
ESD Accessories
ESD-HCP-AUTO
Product No: 106381
 Indirect ESD Field-Coupling-Plane in accordance with ISO 10605 Comply with Informative appendix F. Accessory to ESD3000 test system

ESD Accessories
 
ESD-TARGET2
Product No: 103630
 2 Ohm Target with SMA connector, upper limit >3GHz. For ESD calibration / verification and comparison. Calibrated target attenuator cable chain for up to 10kV.

ESD Accessories
 
ESD-TARGET2 500
Product No: 103633
 500 Ohm target with SMA connector and measuring adapter calibrated according to IEC61340-3-1. For the voltage measurement a voltage probe must be connected between TARGET and DSO e.g. TEK 613917 or equivalent.

ESD Accessories
 
ESD-VCP50
Product No: 103485
 Vertical coupling plate 0.5 x 0.5m with 2m cable and 2x 470kOhm resistors.

ESD Accessories
 
ESD3000 CNH12
Product No: 103634
 Accessory to ESD3000 with RM32 and DN1 to simulate rapidly changing H-field as generated at real ESD discharge.

ESD Accessories
 
ESD3000-OPTOLINK
Product No: 103627
 Optical link 10m with special LEMO plug and RS232 9 pin connector to control ESD3000 from PC. Requires TEMA.

ESD Accessories
 
TC-MIG24ED
Product No: 103638
 Test cabinet to test explosive devices, for EUT with max dimensions 30x20x20cm. Insulation withstand 1.2/50µs up to max. 36kV. With interlock safety switch and warning lamps green/red. Requires safety switch PN 103626

ESD Accessories
 
ESD-STAND Ed2
Product No: 103637
 Non metallic stand for ESD MOUSE, ESD2000, ESD3000, ESD3000DM-EXT, in accordance with IEC 61000-4-2 Ed.2.

ESD Accessories
 
ESD-TARGET2 50
Product No: 103632
 50 Ohm target with SMA connector according to IEC61340-3-1 and -2. Calibrated target attenuator cable chain.

ESD Accessories
 
ESD-TARGET2 DN
Product No: 103635
 2 Ohm Target with SMA connector, upper limit >3GHz. For ESD calibration / verification. Calibrated target attenuator cable chain for up to 30kV. Needed for DN Networks.

ESD Accessories
 
ESD-VERI-V
Product No: 103629
 Charging voltage (up to 25kV) measurement divider 20GOhm, ratio determined by the 1MOhm input of the oscilloscope. Ratio approx. 1:20'000.

ESD Accessories
 
ESD3000 SAFETY-S
Product No: 103626
 Safety switch to short circuit the ESD3000 output, when testing explosive devices.

ESD Accessories
 
ESD3000DM-EXT
Product No: 103628
 Accessory to ESD3000DM's and DN's to separate the control and the discharge module for special applications like airbag or explosive device testing. With the ESD3000DM-EXT the control can be separated maximum 1m.

ESD Accessories