Electricity Meter
Energy costs are increasing worldwide providing an impetus to greater energy efficiency. For users to benefit from this increased efficiency, an accurate and reliable measurement of consumed energy is necessary. The mechanical electricity meter is being replaced by electronic smart electricity meters with remote load monitoring. Because energy meters are installed in the power distribution network, they are subjected to transients, impulse and damped oscillatory wave (DOW) testing.
EMC PARTNER offers extensive test solutions from one hand to conduct all conducted immunity impulse and insulation tests.
Applications
-
a.c. and d.c ELECTRICITY METERS
EMC PARTNER offers extensive immunity and insulation test solutions used for qualification of analog Ferraris and a.c. /d.c. digital electricity meters with voltage up to 600V and currents up to 125A for household and industrial use according to the common standards IEC 62052 and EN 50471
-
DC ELECTRICITY METERS
EMC PARTNER offers also Impulse Generators and Power CDNs for DC (Direct Current) electricity meters which are used in e.g. DC charging station, solar inverters, IT server farms and other DC platforms. The EMC tests are conducted according to IEC 62053-41 for meters with voltage up to 1500 V DC and currents up to 125A.
-
SMART ELECTRICITY METERS
SMART Meters are a.c./d.c. Meters or direct current meters used in smart grids and smart homes with the capability of communication and data transmission via Ethernet, WLAN, PLC or M-BUS. EMC offers in addition the Impulse Generators and power CDNs also Data CDNs for up to 8 lines and speeds up to 1Gbps.
Applications
The IEC 602555-26 divides the electromagnetic environment into severe (zone A) and typical (zone B), whereas IEC 61000-6-5 divides the installation environment into 4 zones from inside to outside EMC protected area. EMC PARTNER offers EMC test equipment for both zones to conduct all impulse, transients and power fail tests, including EFT up to 4kV, Surge up to 4kV, Damped oscillatory waves up to 2kV as well as Dips/interrupts and insulation test up to 8kV.
Transmission Lines Protection
Transformer Protection
Generator Protection
Feeder Protection
Bus Protection
Motor Protection
Application Standards
- IEC 61980-1
- IEC 61851-23-2
- IEC 61851-23
- IEC 61851-21-2
- IEC 61851-21-1
- IEC 61851-1
- IEC 61543
- IEC 62752
- IEC 60664-1
Test Types
- 1.2/50µs voltage insulation
- EFT/Burst impulses
- Combination wave impulses
- 100 kHz ringwave
- AC DIPS / Variations
Documents
Application Standards
Relevant product standards for protection relays testing are listed below
-
IEC 62052-11
Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
-
IEC 62053-41
Electricity metering equipment (DC direct current) - Particular requirements - Part 41 - Static meter for active energy (class 0.5 and 1)
-
IEC 62052-31
Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
-
EN 50470-1
Electricity metering equipment (a.c.) Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
-
EN 50470-3
Electricity metering equipment - Part 3: Particular requirements - Static meters for AC active energy (class indexes A, B and C)
Test Types
- ESD as per IEC 61000-4-2
- EFT Transients as per IEC 61000-4-4
- Surge 1.5/50µs & 5/350 µs as per IEC 61000-4-5
- Ring Wave as per IEC 61000-4-12
- Damped Oscillatory Wave (DOW)
as per IEC 61000-4-18 - Differential mode testing as per IEC 61000-4-19
- AC Dips and Variations as per IEC 61000-4-11
- DC dips and interrupts as per IEC 61000-4-29
- Magnet Fields as per IEC 61000-4-8
- 1.2/50μs Insulation Test as per IEC 62052-31
- 0.1/2000 μs Insulation Test as per EN 50471-1
conducted immunity test solutions
-
DOW-CG1
Multi function Damped Oscillatory Wave (DOW) generator
Compact generator for Damped Oscillatory Wave testing. Integrated three phase CDN for Slow and Fast waves. Magnetic Field output for 1m or 2m coil. Can be extended with insulation test impulses up to 8 kV.
-
IMU-MGE
8KV EFT/Burst, SURGE, Ringwave and 10/700us impulse generator
Compact generator for EFT/Burst, SURGE, 100 kHz Ringwave and 10/700 impulses up to 8KV. Integrated 16 A CDN. Extend with ESD, Dips/Interrupts and Common Mode.
insulation test solutions
-
INS-0805
8 kV impulse voltage tester with fixed energy and impedance.
1.2 / 50 µs impulse generator with impedance 500 Ohm and fixed impulse energy 0.5 Joules in 10 ranges from 500 V to 8 kV. Colour touch panel control with graphic help. Personnel protection with test cabinet TC-ST. -
MIG1203 STEP
Insulation test system 1.2/50 up to 12kV with step function
Impulse generator 1.2/50µs lightning impulse up to 12kV with special circuit to allow fast risetime impulses. 9 Joule Test @10kV and @12kV is possible in combination with the NW-NMI-M6C3C4.
-
MIG1803
Insulation test system up to 18KV
1.2/50µs lightning impulse generator up to 18 kV with 40 Ohm impedance. High voltage outputs on top plate protected by TC-ST test cabinet. 0.1/2000µs impulse is as well possible in combination with NW-01-2000.
ACCESSORIES
-
COUPLING/DECOUPLING NETWORKS CDN-A / CDN-M
CDN with voltage capability up to 690 Vac per phase, 1500 Vdc and selectable current ranges up to 200A.
-
VAR-EXT1000
Extends Variac up to 16A for IMU systems
VAR-EXT1000 extends IMU Series generators up to 16A single phase. Dips and variations testing can be performed at any level from 0 to 100% according to IEC 61000-4-11.
-
AC DIPS & Interrupts PFS / SRC
3-Phase dips generator and transformer suitable for both star and delta connections with selectable dips levels.
-
CDN-UTP8 ED3
Manual CDN for communication line testing up to 8 lines
CDN-UTP8 ED3 is a compact manually operated coupling devices enabling testing for many standards. Combination Wave (CWG) for IEC 61000-4-5, Ringwave for IEC 61000-4-12 and 10/700 telecom according to ITU-T K44.
-
SLAVE SMART I1
Current test generator IEC 61000-4-19
IMU SLAVE SMART I1 is current test generator in the frequency range 2kHz to 150kHz including CW and MODULATED disturbance source, CDN for VOLTAGE circuits, REFERENCE meter connections and a 25A current source. Direct control from IMU series interfaces. -
CDN-DOW-DATA-HF18
Coupling and Decoupling Network for IEC 61000-4-18. Test with 100 kHz and 1 MHz DOW onto 4 twisted pair (8 lines) with data rates up to 1 GB/s.
-
CDN-DOW-DATA-LF
Coupler for 8 signal and data lines used with Damped Oscillatory Wave (DOW) generators according to IEC 61000-4-18 at 100kHz and 1MHz.
-
NW-01-2000
MIG1203STEP coupling Network for electricity meters
0.1/2000µs waveform Network with 1 Joule impulse energy at 8kV and 50 Ohm impedance as per EN 50471-1 or similar standards.
-
NW-NMI-M6C3C4
MIG1803 coupling Network for electricity meters
1.2/50µs waveform with 10 Joule impulse energy at 10kV and 12 kV and 40 Ohm impedance as per NMI M6-1 or similar requirements.
-
OPTIONS AND COMFORT